Call: 336-283-0800

Back To Index - Contact Info - Secure Ordering

Four Cylinder

Caliber/Compass/Patriot - SRT4 - Neon - PT Cruiser - Engine Components

Caliber/Compass/Patriot

Cold Air Intake System
This bolt-on system is designed to direct cooler outside air through a directional cone filter and funnel it directly into the intake manifold. The Mopar performance cold air intake system provides noticeable horsepower and torque gains under varying atmospheric conditions. Includes all mounting hardware and a pre-oiled, washable and reusable filter. Install with the Cat-Back Exhaust System (P5153564) and Tubular Exhaust Headers (P5153566) for an over 10 hp gain (measured at front wheels).
77060012	Caliber Cold Air Intake System	322.00

Performance Air Filter
Mopar performance air filters are constructed with factory-tight seals, engineering level polyurethane, deep 4-ply pleats of oiled cotton gauze, and a 2-layer screen. Filters offer high flow and low restriction, better throttle response, and increased filtration and horsepower. Pre-oiled filters are washable and reusable.
P5153573	Caliber Performance Air Filter	41.50
Air Filter Service Kit Services all of Mopar’s washable/oilable filters for both the Mopar cold air induction systems and Mopar Performance Air Filters.
P5153376	Performance Air Filter Service Kit	14.00

Cat-Back Exhaust System
The Mopar cat-back exhaust system, features T304 2.25" stainless steel (aircraft quality) construction with mandrel-bent tubing, stainless band (Torca) clamps, and polished 3.125" dual wall tips. This free-flow system provides a horsepower and torque gain, improved fuel economy, and is CAD designed and dyno tested for optimal performance and sound. Install with the Tubular Exhaust Headers (P5153566) and Cold Air Intake System (P5153572) for an over 10 hp gain (measured at front wheels).
P5153564	Cat-Back Exhaust System (2007 FWD Caliber)	706.00
P5153690	Cat-Back Exhaust System (2007 AWD Caliber)	698.00
Anti-Sway Bar Kit Mopar Performance Anti-Sway Bars are made from high-quality bar material that ensures durability and heightens performance, ride and handling by virtually eliminating body roll, helping to keep all four tires fi rmly on the pavement. An exclusive adjustable rear sway bar allows you to tune in the system to your specific driving needs!
P5153749	Stage 1 Anti-Sway Bar Kit–25mm Front, 19mm Rear, 3-Position Adjustable (2007 Dodge Caliber)	355.00
Lowering Springs These Lowering Springs for the all-new Dodge Caliber lowers it a full 1.5" from stock ride height and improves handling capability. Service Parts for Suspension Upgrade Kit (P5153252).
P5153251	Lowering Springs (2007 Dodge Caliber)	236.00

Strut Tower Brace
Made of heavy gauge powder coated steel, this MIG welded Mopar performance strut tower brace reduces body flex in the front end, improving handling and drivability. Easy bolt-on installation.
P5153565	Caliber Strut Tower Brace	276.00

Dodge Neon SRT4

Turbo Upgrade Kits / Exchange The Dodge SRT-4 is already a hot number, but Mopar knows that more is better, so the Stage 1, 2 and 3 Turbo Upgrade Kits are out to give you just that! Mopar Performance engineers want the same thing you do--more power…NOW!
Turbo Upgrade Kits Service Parts
4510868	Blow-Off Valve Diaphragm (Stage 1, 2, 3R)	82.00
4510529	+30% Fuel Injector — (Stage 2, 3R)	82.00
4510063	Fuel Rail Assembly — Demand Regulated (Stage 3R)	267.00
4510554	Fuel Pump Module — 75 psi Regulated (Stage 3R)	644.00
4510864	Iconel Center Section Turbo Cartridge (Stage 3R)	689.00
4510865	TiAl Center Section Turbo Cartridge (Stage 3R)	1584.00
4510867	Compressor Cover Kit — Includes Cover, Surge Bypass Valve, and Surge Valve Bolts (Stage 3R)	222.00
4510626	Inline Water Filter (Turbo Toys)	27.00
4510632	Sprayer Pump (Turbo Toys)	55.70
4510861	Wire Harness Terminals — Set of 10 (Turbo Toys)	10.75
4510862	Blue Led Wire Harness (Turbo Toys)	31.00
4510923	Water Jets — Set of 4 (Turbo Toys)	119.00
P4510869	Manifold Kit, Turbo Exhaust Elbow (P4510278), Manifold (P4510877), Elbow Bolts (5), Stage 3R	1,314.00
P4532586	+40% Fuel Injector (1)	45.00
04852396AB	Fuel Line Washers (6), Copper–All Turbos	3.50
04884447AA	Exhaust Gasket, Manifold to Head–All Turbos	12.50

	Blow-Off Valve Conversion Kit The Mopar Performance Blow Off Valve Conversion Kit maximizes the function of your vehicle's turbo system by venting excess, hot compressed air into the atmosphere, thereby reducing your intake air temperature. This kit adds a vent to the stock blow off valve and creates a unique turbo sound for your SRT Turbo.
4510548	Blow-Off Valve Conversion Kit anodized, blue	64.00
Cold Air Intake What’s so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power. The Mopar Cold Air Intake System increases airflow by as much as 20%, boosting torque up to 10 lbs., and power by nearly 10 horsepower. All of this while improving fuel economy (1 to 2 mpg depending on driving style). C.A.R.B. approved E.O. #D-265-22.
77060004	Cold Air Intake (2003–05 SRT4)	331.00
77060022	2000-04 2.0L SOHC Neon Cold Air Intake	304.00

Performance Air Filters Mopar Performance air filters are constructed with factory tight seals; engneering level polyureathene; and deep, 4-ply pleats of oiled cotton gauze and 2 layers of aluminum screen. These filters offer high flow and low restriction, better response and increased filtration and horsepower. Filters are washable and reuseable and come pre-oiled.
4510478	2003 SRT-4 and 2001-04 2.0L Neon Performance Air Filter	44.00
05029257AA	Replacement Gearshift Boot (SRT4)	36.50

Limited-Slip Differentials Quaife automatic torque-biasing (ATB) Limited-Slip Differentials are high quality components that help make your ride even quicker. The unique design improves both drive wheels under nearly all conditions. It senses which wheel has the better grip and biases more power to that wheel.
5007923	Limited Slip Differential (2003 SRT4, 2002–05 Stratus R/T Sedan, Sebring Convertible V6 T-850 MTX)	1260.00
4510588	Limited Slip Differential Installation Kit (2003 SRT4, 2002–05 Stratus R/T Sedan, Sebring Convertible V6 T-850 MTX)	63.00
5007382	torque sensing Limited-Slip Differential (2001–05 Neon T-350 MTX and PT Cruiser Non-Turbo)	1,551.00

Cat-Back Exhaust Systems Mopar Performance Cat-Back Exhaust Systems, including the muffler, feature T304 stainless steel construction (aircraft quality) with mandrel-bent, stainless band (torqua) clamps and polished tips (unless otherwise noted). These free flow systems provide a horsepower and torque gain, improved fuel economy and a deeper tone.
4510461	Cat-Back Exhaust System, 2003-2003 Neon SRT4 split rear, split rear exit, oval- rolled edge-angle cut 2.50 inch pipe	422.00
Borla Cat-Delete Kit More power when you need it is what’s behind the new Borla Cat-Delete Kit. Eliminating the catalytic converter means less restriction and more airflow and that means more power. And, as a bonus, you get the kind of engine sound that will show everyone that you mean business.
P4510649	Cat-Back Exhaust System, Dodge Neon SRT 4 cat delete pipe, 2.50 inch tubing, comes with replacement front pipe to be used with P4510461 only	430.00

Suspension Upgrades Stage 1 Suspension Components - Anti-Sway Bars Here's your chance to improve the ride and handling of your vehicle. Mopar Performance anti-sway bars feature the highest quality materials to ensure durability while improving performance, ride and handling.
4510454	2003-04 SRT-4 Stage 1 Anti-Sway Bar Kit Front and Rear	504.00

Stage 1 Suspension Components - Performance Springs These heavy duty performance springs are designed for sporty handling combined with a comfortable ride. They provide a 25mm from the stock ride height.
4510458	2003-04 SRT-4 Stage 1 Performance Springs, Front and Rear	250.00
4510460	2000-04 Neon Stage 1 Performance Springs, Front and Rear	250.00

Stage 2 and 3 Coilover Suspension Kits Mopar Performance Stage 2 and 3 Coilover Kits feature new stainless steel INOX technology for durability and quality exclusive to Mopar Performance. Highlights Shortened strut rods for increased travel Trapezoidal adjustment threads for simple height adjustment Elastomer bump stops with integrated dust boot protection Utilizes stock upper strut mounts Components INOX-line stainless steel strut housings Anodized alumium spring collars and add-on pieces High-quality, powder-coated, high tensile racing springs Optimal ventilation, guide and sealing system with minimal friction Hardened, chromium-plated piston rods Pistons with V-shaped Teflon seals Stage 2 Coilover Suspension Kits Stage 2 Coilover Suspension Kits are height adjustable from 0mm to 30mm lower than factory, and include fixed valve dampers.
4510447	2003-04 SRT-4 Stage 2 Coilover Kit	1480.00

Stage 3 Coilover Kit Stage 3 Coilover Kits are height and rebound adjustable from 20% under to 50% over Stage 2 settings. Rebound adjustment takes place via an adjustment screw at the end of the piston rod, and primarily affects low and midrange rebound dampening.
4510587	2000-04 Neon Stage 3 Coilover Kit	1480.00
Stage 3R Damper Kit The Mopar Stage 3R Damper Kit is designed for the serious club sport driver and includes all the build quality and features of the Stage 2 and 3 kits, but with added racing features. The Stage 3R system adds independently adjustable rebound and compression on each damper, as well as your choice of a range of spring rates (available separately), designed to complement the valving for every type of on-road racing and street use. This Club Racer system is purchased as a set of coilover shock absorbers similar to Mopar Stage 2 and 3 systems, but without springs. Complete vehicle set. Features: • Independently adjustable rebound and compression dampening • Stock height and down lowering range • Easy-adjust stainless steel-impregnated composite perches • Special ventilation and sealing system • Hardened chromium-plated piston rods • Pistons with V-shaped Teflon® seals • Strut housings in INOX-line stainless steel
P4510825	Stage 3R Damper Kit — Race Only, Double-Adjustable Threaded Strut Kit (2003–05 SRT4)	2,200.00
Stage 3R Race and Helper Springs Mopar Stage 3R Race and Helper Springs can be purchased separately in various rates. They have been designed to work with the valving and setup of the Stage 3R Coilover Suspension System. Constructed of a new lightweight alloy, these high-tensile race springs provide a lighter weight solution, along with increased travel before spring bind, than standard linear springs. Depending on your use, different rates can be combined with the valving to produce various handling characteristics. Sold in pairs only.
P4510823	High-Tensile Race Springs — 35 N·M (250 MM) (2003–05 SRT4)	185.00
P4510824	High-Tensile Race Springs — 40 N·M (250 MM) (2003–05 SRT4)	205.00
P4510836	High-Tensile Race Springs — 45 N·M (250 MM) (2003–05 SRT4)	185.00
P4510818	High-Tensile Race Springs — 50 N·M (250 MM) (2003–05 SRT4)	185.00
P4510819	High-Tensile Race Springs — 60 N·M (200 MM) (2003–05 SRT4)	185.00
P4510837	High-Tensile Race Springs — 70 N·M (200 MM) (2003–05 SRT4)	185.00
P4510820	High-Tensile Race Springs — 80 N·M (170 MM) (2003–05 SRT4)	205.00
P4510821	High-Tensile Race Springs — 90 N·M (170 MM) (2003–05 SRT4)	185.00
P4510817	Front Helper Spring (2003–05 SRT4)	109.00
P4510822	Rear Helper Spring (2003–05 SRT4)	109.00
Rear Tension Strut Kit Rear Tension Struts feature a high-durometer bushing material designed for heavy-duty and competition use. The revised design results in improved toe stability (reduced bump-steer), which virtually eliminates rear wheel hop under heavy braking. Provides more positive suspension control for improved driver feedback and dynamic stability.
P4510826	Rear Tension Strut Kit — Left and Right (2003–05 SRT4, 2000–05 Neon)	45.00
Camber Plates
P4510827	Front Camber Plates for Stage 2, 3, and 3R suspensions (2001–05 Neon)	385.00
P4510828	Rear Camber Plates for Stage 2, 3, and 3R suspensions (2001–05 Neon & SRT4)	368.00
Strut Tower Braces Stop the flex. When the body is rigid, the car handles better. Available in titanium or steel for front (shown) and rear. Front braces are not compatible with carbon fiber valve cover P4510538.
P4510543	Steel Strut Tower Brace — Front (2003–05 SRT4)	118.00
P4510876	Steel Strut Tower Brace — Rear (2003–05 SRT4)	118.00
P4510874	Titanium Strut Tower Brace — Front (2003–05 SRT4)	315.00
P4510875	Titanium Strut Tower Brace — Rear (2003–05 SRT4)	315.00
P5153306	Steel Strut Tower Brace (2000–03 Neon 2.0L)	150.00
Rear Adjustable Control Arm
P4510870	Rear Adjustable Control Arm, Rear Set 2000–05 2.0L/2.4L, Neon, SRT4	140.00
EXTERIOR BODY - Front Fascia Original equipment replacement piece, primed.
68032412aa	Front Fascia (SRT4), Shipped Primed	488.00
Rear Fascia Original equipment replacement piece, primed.
68032407AA	Rear Fascia (SRT4), Shipped Primed	438.00
Hood Original equipment replacement piece, primed.
05134116AC	Power Bulge Hood (SRT4)	813.00
Charge Air Cooler Original equipment replacement piece.
05278944AD	2.4L Charge Air Cooler (SRT4)	395.00

Dodge Neon


	ENGINE BOBBLE STRUT
P5007028	engine bobble strut ALL	68.00

	ENGINE MOUNT
P5007027	Front perf. Mount 95/99 ALL	56.00

	ING. WIRE SETS 7.5 MM BLUE
P4876511	ALL 2.0/2.4 DOHC	44.00

	DOHC HI-PER HYD LASH ADJ.
P5007440	2.2 OR 2.4 lash adjusters (set of 4)	28.50

	EGR BLOCK OFF PLATE
P5007276	95/99 SHOC/DOHC	49.00

	Colored Valve Covers These hot-looking valve covers can bring car show quality to any Turbo. Available in a variety of colors, these Mopar Valave Covers can bring that final touch of class to your high-performance vehicle.
	SRT-4 Turbo - 2.4L Turbo (2003-04)
P4510368	Yellow Powder-Coated Valve Cover	193.00

	OVERSIZE STAINLESS VALVES
P5007507	SOHC oversize intake valves	15.50
P5007508	SOHC oversize exhaust valves	15.50

	HIGH PERF. VALVE SPRINGS
P5249846	ALL 2.0 SOHC	10.75 each
P4876636	ALL 2.0 DOHC	10.75 each

	WINDAGE TRAY
P5007278	2.0 OR 2.4 engines	222.00
Cold Air Intake Systems Heat up your Neon with a steady flow of cold air! These bolton systems are designed to force cooler outside air through a directional cone filter and funnel, directly into the intake manifold providing noticeable horsepower and torque gains under varying atmospheric conditions. Kits include all mounting hardware and a pre-oiled, washable/reusable filter.
77060022	Cold Air Intake System (2000–05 Neon 2.0L SOHC)	283.00
Air Filter Constructed with factory tight seals, engineering level polyurethane, deep 4-ply pleats of oiled cotton gauze and two layers of aluminum screen. This fi lter offers high flow and low restriction, better throttle response and increased filtration and horsepower. Filters are washable and reusable and come pre-oiled.
P4510478	Air Filter (2003–05 SRT4, 2001–03 Neon)	44.00

	ACR PERF. STRUTS
P5007389	2000-01 models front (each)	442.00
P5007442	2000-01 models rt rear ( each)	230.00
P5007443	2000-01 models lt rear ( each)	230.00
P4876812	95/99 ALL front each	230.00
	ACR STRUT ADJUSTER KNOB
P5007269	ACR strut adjuster knob	19.00

	ACR POWER STEERING RACK
P5007308	95/99 ACR steering rack	259.00

	ACR HUB AND BEARING KIT
P5007314	95/99 ACR hub and bearing	109.00

	Clutch Installation Kit
P5007435	performance installation kit	52.00

PT Cruiser

Blow-Off Valve Conversion Kit The Mopar Performance Blo Off Valve Conversion Kit maximizes the function of your vehicle's turbo system by venting excess, hot compressed air into the atmosphere, thereby reducing your intake air temperature. This kit adds a vent to the shock blow off valve and creates a unique turbo sound for your PT Turbo.
P4510548	Blow-Off Valve Conversion Kit anodized, blue	64.00

	DOHC HI-PER HYD LASH ADJ.
P5007440	2.2 OR 2.4 lash adjusters (set of 4)	29.00
New Suspension Upgrades Mopar Performance Stage 1, 2, and 3 suspension components are produced in conjunction with KW Suspensions, using Daimler Chrysler specs to ensure optimum performance. Leading edge technology and dedicated engineering are combined to provide first-class ride and handling upgrades for the PT Cruiser. Stage 1 Suspension Components - Anti Sway Bars Here's your chance to improve the ride and handling on your vehicle. Mopar Performance anti-sway bars feature the highest quality materials to ensure durability while improving performance, ride and handling.
P4510455	2003-04 PT Turbo Stage 1 Anti-Sway Bar Kit, front	430.00
P4510261	2003-04 PT Cruiser (non-turbo) Stage 1 Anti-Sway Bar Kit, front	422.00
P4510839	Stage 1 Sway Bar Installation Kit (2001–06 PT Cruiser)	119.00
Stage 1 Suspension Components - Performance Springs These heavy-duty performance springs are designed for sporty handling combined with a comfortable ride. They provide a 25mm drop from the stock ride height.
P4510262	2003-04 PT Turbo Stage 1 Performance Springs, front and rear	250.00
P4510459	2001-04 PT Cruiser (non-turbo) Stage 1 Performance Springs, front and rear	250.00
Stage 3 Coilover Kit The Mopar Stage 3 Coilover Suspension Kit includes all the features of the Stage 2 kit. In addition, the Stage 3 kit allows drivers to adjust the damper setting of the suspension system for the ultimate in personalization. The adjustable rebound damper gives drivers the ability to adjust the vehicle’s pitch and roll to their driving preferences and needs, from the street to the track. The Stage 3 kit is height adjustable and rebound adjustable from 20% under to 50% over Stage 2 settings. Rebound adjustment takes place via an adjustment screw at the end of the piston rod, and primarily affects the low and midrange rebound dampening. Complete vehicle set. Features: • External adjustable rebound damper • Stock height and down lowering range • Easy-adjust stainless steel impregnated composite perches • High-quality, high-tensile racing springs • Special ventilation and sealing system • Hardened chromium-plated piston rods • Pistons with V-shaped Tefl on seals • Strut housings in INOX-line stainless steel
P4510628	2003-04 PT Turbo Stage 3 Coilover Kit	1567.00
Cold Air Intake System Heat up your PT Cruiser with a steady flow of cold air! These bolt-on systems are designed to force cooler outside air through a directional cone fi lter and funnel, directly into the intake manifold providing noticeable horsepower and torque gains under varying atmospheric conditions. Kits include all mounting hardware and a pre-oiled, washable/reusable filter.
P5007832	2001-04 2.4L PT Cruiser (non-turbo) Cold Air	230.00
Performance Air Filters Mopar Performance air filters are constructed with factory tight seals; engineering level polyurethane; and deep, 4-ply pleats of oiled cotton gauze abd 2 layers of aluminum screen. These filters offer high flow and low restriction, better throttle response and increased filtration and horsepower. Filters are washable and reusable and come pre-oiled.
P4510476	2001-04 PT Cruiser Performance Air Filter	44.00
Borla Cat-Back Exhaust Systems Features T304 stainless steel construction (aircraft quality) with mandrel-bent tubing, stainless band (torca) clamps and polished tips. These free-fl ow exhaust systems provide horsepower and torque gains, improved fuel economy and a deeper tone.
P4510463	Cat-Back Exhaust System, 2003–05 PT Turbo, Dual-Split rear, round, 3.50" rolled, angle cut, Phantom Tips 2.50 inch pipe	559.00
P5007748	Cat-Back Exhaust System, 2001 PT Cruiser 2.4L 4 cl. at/mt FWD 4 dr — single tip, 3.5" half rolled, angle cut, Phantom Tip dual-split rear, 2.25 inch pipe	662.00
82208095	Exhaust Tip, PT Cruiser tip. 3.0 inch x 7 inch long x 2.25 round, round rolled angle cut, clamp on tip	53.00
P5007746	Cat-Back Exhaust System, 2001–06 PT Cruiser, 2.4L 4 cl FWD 4 dr., Non-Turbo, European version (TUV approved), single tip, half rolled, angle cut, Phantom Tip split rear, 2.25 inch pipe	620.00
Limited-Slip Differentials Quaife automatic torque-biasing (ATB) Limited-Slip Differentials are high-quality components that help make your ride even quicker. The unique design improves handling and steering, and powers both drive wheels under nearly all conditions. It senses which wheel has better grip and biases more power to that wheel.
P5007382	2001-04 PT Cruiser (non-turbo) Quaife ATB Limited-Slip Differential	1,551.00
Hurst Short Throw Shifter The short throw shifter for manual PT Cruisers enhances performance by providing shorter, quicker shifts and reducing knob travel by 30%. Custom designed to eliminate any vehicle modifications when installing. Positive gear stops eliminate overshifting, helping prevent transmission and cable damage. Includes urethane bushings to eliminate mounting bracket flex providing a more positive and secure shifting feel. CNC-machined billet steel gear sleector and billet aluminum stop collar provides ultimate strength. Classic Hurst appearance and feel fits perfectly into the "retro" PT Cruiser
P4510486	2003-04 PT Turbo Hurst Short Thrrow Shifter	180.00
	ORGINAL MOPAR ACCESSORIES
	PROWLER AND P/T CRUISER
	PASSENGER CABIN AIR FILTRATION
82206886	p/t cruiser 2001-02	19.00

82208109	black w/pt cruiser logo	138.00
	DOOR EDGE GUARDS
82205454	p/t cruiser, black stainless steel w/vinyl	30.00
	laminate (set of 4)
	ENGINE BLOCK HEATER
82206785	pt cruiser 2.4L dohc 2001-02	35.00
	P T CRUISER EXTERIOR APPEARANCE

82207408	chrome door spears (frt and rear) 2001-02	214.00

82208095	chrome exhaust tip 2001-02	52.00

	CARPET FLOOR MATS
82206196	pt cruiser (4pc) taupe 01-02 w/aquamarine	58.50
	FOG LIGHT KIT
82205451	pt cruiser 2001-02 fog light kit (complete)
	lights mount in fascia	140.00
	LUGGAGE RACK-ROOF MOUNT
82206179AB	pt cruiser 2001-02 removable roof rack,
	brushed alum. T-slot mounting	197.00

	SPOILERS (REAR)
82205686	pt cruiser 2001-02 primed	168.00

Four Cylinder Engine Components

Engine Teardown Gasket Set Set features all gaskets needed for complete engine teardown, including oil pan, cylinder head, valve cover, chain case cover, intake manifold and oil pump.
P4120868	Engine Teardown Gasket Set (2.2L Except Turbo II)	52.00
Purple Shaft Camshafts Mopar Purple Shaft camshafts are designed and engineered exclusively for your engine. A wide range of profiles is available, from mild to wild. All Purple Shaft Camshafts are developed, dyno’d and track tested by Mopar engineers for increased power and rpm potential while maintaining reliability and the best possible low-speed characteristics, including torque and idle quality. Mopar Purple Shaft Camshafts offer the best horsepower-to-dollar-spent value. Each package contains the camshaft, cam lube, instruction sheet, and tappets.
P4452767	Hydraulic Camshaft, 2.2L/2.5L	119.00
P4529314	Hydraulic Camshaft, 2.2L/2.5L	119.00

Offset Camshaft Key Set For centerlining your camshaft, these hardened keys are color coded in 1°, 2°, 3°, 4° and 5° increments. Production key is used for zero offset.
P4349650	Offset Camshaft Key Set (2V SOHC)	47.00
Rocker Arms These heavy-duty Rocker Arms feature hardened sintered iron inserts. Designed for added strength and wearability, they fit all 2.2L and 2.5L SOHC engines with non-roller cams. Extra length version keeps rocker from falling off valve tip with high-lift cams. Sold as a set of eight.
P4349147	Heavy-Duty Rocker Arms (2.2L/2.5L SOHC with Non-Roller Cams)	65.00
Cylinder Head Bolt Set Includes 10 head bolts and washers.
P4349736	Cylinder Head Bolt Set — 11 mm (1985 and Later OHC) 2.2L/2.5L	43.00
P4120456	Hardened Washer Set — 3/8” 2.2L/2.5L	15.50
Composition Material Cylinder Head Gaskets Thick 0.079" to 0.080" Composition Material Cylinder Head Gaskets can be used for replacement or competition applications up to 12.5:1 compression ratio. Sold as engine set. 2.2L/2.5L
P4452005	Composition Material Cylinder Head Gaskets (TBI, Turbo I)	19.00
P4452006	Cross-Drilled Cylinder Head Gaskets (Turbo II)	30.00
Oil Pressure Relief Spring Increases engine oil pressure over stock spring for highperformance applications. Delivers up to 70 lbs. of oil pressure. Includes cap and instructions.
P3690944	Oil Pressure Relief Spring Set (Small Block, 2.2L/2.5L, 3.9L V6)	5.00
Oil Pump When the going gets tough, you’ll want to be sure to supply as much oil to your engine as possible. Mopar’s heavy-duty, high-volume Oil Pump will do the job and take the most severe punishment.
P4286741	Oil Pump (2.2L, Except 1987 and Newer Turbo)	75.00
Oil Filter Engineered to meet the demands of heavy-duty and highperformance applications.
P4452889	High-Performance Oil Filter — Black Finish (2.2L/2.5L)	10.75
Valves Get the most out of your engine with Mopar performance valves. These stainless valves have swirl-polished underheads that have no flat or ski-jump areas and feature a 114.3 mm stem length.
P4529824	Intake Valve — 40 mm Diameter, One Square Groove, Back-Cut (1986–up 2.2L/2.5L SOHC)	23.50
P4529825	Exhaust Valve — 35 mm Diameter, Triple Groove, Back-Cut (1986–up 2.2L/2.5L SOHC)	37.00
Valve Seat Inserts Made of special hardened material. Requires head machining. Must be pressed into the head once prepped. Seat ring O.D. must be sized into the head before seat is pressed in. Can be used to modify, rebuild or repair cylinder heads. Sold individually.
P4349125	Aluminum Valve Seat Insert — Intake, 44 mm (2.2L)	21.00
P4349126	Aluminum Valve Seat Insert — Exhaust, 36.8 mm (2.2L)	24.00
Valve Keepers (Split Locks) Made from hardened material, these split locks feature an 8 mm stem diameter and 7° valve angle. Can be used for restoration or performance applications. Different groove styles are available to meet your application requirements. Sold in cylinder head sets of 8.
P4452030	Valve Keepers (2.2L/2.5L SOHC)	10.75
P4452031	Valve Keepers (2.2L/2.5L SOHC)	10.75
Valve Seals Made of high-temperature Viton material, these Valve Seals feature a full or semi-umbrella shape for best dual-purpose use. Helps prevent oil seepage down valve guides. Not recommended for use with dual valve springs. Sold in sets of 16.
P4349121	Valve Seals — 8 mm (2.2L/2.5L SOHC)	10.75
Valve Spring
P4286813	Valve Spring	8.50
P3412068	Valve Spring	8.50
Valve Spring Retainers
P4452032	Chrome Moly Valve Spring Retainer (2.2L/2.5L SOHC, Truck Magnum/Jeep Engines)	9.50