Call: 336-283-0800

Back To Index - Contact Info - Secure Ordering

Viper / V10 Parts


High Performance Aluminum 8.3L V10 Crate Engine
P5153598	8.3L V10 Crate Engine	$25,199
P5153591	Race Engine Controller 2006 SRT10 Ram 1500 M/T	369.00
P5153335	Race Engine Controller 2005 SRT10 Ram 1500 M/T	289.00
P4510918	Race Engine Controller 2004 SRT10 Ram 1500 M/T	369.00
P4510172AB	Race Engine Controller (2003–06 Viper SRT10)	369.00
Viper V10 Short Block Assembly Includes: Block, Pistons, Connecting Rods, Crankshaft, Crankshaft Bearings
P5155248	8.3L Short Block for Manual Trans vehicles	$5674.00
P5155249	8.3L Short Block for Auto Trans vehicles (Viper Truck Application or can be modified for Viper)	$5674.00
Stage 1 Engine Control Module Spark and fuel tables have been modified to function when "power adders" like headers, cat back exhaust, aftermarket cams and cold air inlet systems are used. The computer will sense the additional air flow and will compensate with appropriate fuel and spark to maximize performance. Power adders can be used without turning on dash warning lights. Catalysts and O2 sensors can be removed without tripping warning lights or causing limp mode to activate. Revised fuel/spark tables are intended for power levels below 700 hp (This controller is not intended for use with nitrous, superchargers, or packages that go above 700 hp) 1 - 4 skip shift feature in the production calibration is eliminated. Rev limit increases from 6400 rpm to 6500 rpm. Tachometer is more sensitive, 25 rpm updates vs. production calibration of 100 rpms. Engine idle speed increased from 700 rpm to 750 rpm The ETC pedal / throttle MAP has been refined to improve pedal feel 93 octane fuel use only
P5155254	2008-09 Vipers – Off Road Use Only	1050.00
Race Engine Controller The Mopar Race Engine Controller for the Viper SRT10 is specifi cally calibrated for use with the Race Camshaft (P4510171) and the Viper 3" Race Exhaust (P4510176). It optimizes fuel and air tables for peak performance without catalytic converters, removes the skip shift feature (found on the production model), and is calibrated for premium pump fuel (91 octane minimum). For race use only.
P4510172AB	Race Engine Controller (2003–06 Viper SRT10)	376.00
Race Camshaft Based on the Competition Coupe camshaft. Uses production springs and rocker arms to offer a 6–8 horsepower increase at top end of rpm range. Recommended for use with Race Engine Controller (P4510172) and 3" Race Exhaust (P4510176). Features: • Cam Lift: 0.320" Intake and 0.320" Exhaust • Duration at 0.050": 220.00" Intake/230.5" Exhaust • Cam Centerline = 117° after Top Dead Center
P4510171	Race Camshaft (2003–06 Viper SRT10)	718.00
Race Exhaust System The Mopar 3" Race Exhaust System provides low restriction from manifold to tip. Catalytic converters are eliminated (upstream and downstream), and it has a side exit from the sill that removes the H-pipe crossover. This system is more than 30 lbs. lighter than the production exhaust system. The exhaust muffl er is tuned to minimize noise where track restrictions are present, yet it yields a deep sounding exhaust note. Recommended package includes Race Engine Controller (P4510172) and Race Camshaft (P4510171). Total performance increase when Controller, Camshaft and Exhaust are used together: Horsepower increase = 44 bhp at 4,800 rpm Torque increase = 48 ft.-lbs. of torque at 4,800 rpm
P4510176	Cat-Back Exhaust System, 2005-2006 Viper street system, SRT10 8.3l V10 single round rolled angle-cut, exits on each side. 2.50 inch pipe- race system	910.00
Cat-Back Exhaust System Add some extra bite to your Viper. This Cat-Back Exhaust System features stainless steel construction (including the muffl er) with mandrel-bent tubing, which provides horsepower and torque gains, improved fuel economy, and a deeper tone. Includes two muffl ers, right and left turn out assemblies, and four 2-1/2" clamps.
P4510608	Cat-Back Exhaust System, 2005-2006 Dodge Viper street system, SRT10 8.3l V10 single round rolled angle-cut, exits on each side. 2.50 inch pipe	545.00
Performance Exhaust System Offers low restriction with a performance sound. Made from 304 stainless steel, this Performance Exhaust System features 3" diameter tubing for high-volume fl ow, and factory-style band clamps. Exclusive laser-etched Viper logo on polished stainless steel exhaust tips with rolled rims. Bolt-on replacement for production rear exit exhaust.
P5007274	Cat-Back Exhaust System, 1996-1999 Dodge Viper GTS/RT-10 8.0l. V10 dual round angle cut phantom, rear exit, with Viper head logo etched on tips)	1447.00
Air Filter Constructed with factory tight seals, engineering level polyurethane, deep 4-ply pleats of oiled cotton gauze and two layers of aluminum screen. This fi lter offers high fl ow and low restriction, better throttle response, and increased fi ltration and horsepower. Filters are washable and reusable and come pre-oiled.
P4510940	Air Filter (2003–06 Viper SRT10)	41.50
Smooth Bore Inlet Hoses ACR production part with correct molded bend and hose end diameters. Provides increased airfl ow with less turbulence for more horsepower. 5-ply polyester reinforced silicone shell eliminates collapse due to high vacuum. Features a fl uro-silicone liner for fuel/oil protection and 100,000+ mile durability. Includes two hoses.
P5007362	Black Smooth Bore Hoses (Viper RT/10 and GTS)	250.00
Valves Stainless steel valves offer improved durability. Standard stem length (5.726") with oversize head diameters. Swirl-polished underhead area, chromed stem and hardened tip. Cylinder Head (P4876869) is no longer available through Mopar.
P5007510	2.02 std. length intake valve	16.95
P5007511	1.60 std. length exhaust valve	17.95
GTS-R Engine Parts - Valve Stainless steel for improved durability. Stem length is 0.100" longer than stock, and head diameter is oversized. Swirlpolished underhead area, chromed stem and hardened tip.
P5007514	Exhaust, 1.60" Diameter, 5.826" Stem (Viper GTS-R)	22.50
Differential Assemblies Complete differential assemblies with all new components and Mopar Performance Parts gear sets fully assembled to production specifications. • New aluminum housing with specially cast-in bosses for Mopar Performance Parts differential cooler fittings. Bosses are drilled, tapped and plugged in 3 places, ready for cooler fitting installation • New production Trac-Lok with upgraded 7/16" diameter ring gear retaining bolts • New improved design pinion seal • Choice of 3 Mopar Performance Parts gear sets • Cast aluminum differential cover/support sold separately as P5007528
P5007403	4.10:1 gear w/posi	1,215.00

	Viper Ring And Pinion Sets
P5007022	Ring and Pinion Set — 3/8" Diameter, 3.73 Gear (1996–2006 Viper RT/10 and GTS)	428.00
P5007043	Ring and Pinion Set — 3/8" Diameter, 4.10 Gear (1996–2006 Viper RT/10 and GTS)	295.00
Race Ring and Pinion Sets Upgraded to stronger 7/16" diameter ring gear retaining bolts. Requires Trac-Lok (P5007555 — no longer available through Mopar) when installed in 1996–2000 Dana Super 44 differential. The 7/16" diameter bolts are included in Buildup Kit (P5007553). 2001 Production Trac-Lok units use 7/16" diameter ring gear retaining bolts.
P5007526	Race Ring and Pinion Set — 7/16" Diameter, 3.73 Gear (2000–05 Viper)	382.00
Hurst Short-Throw Shifter Shift throw reduced by 40%. One-piece shift stick and gold anodized billet aluminum construction for durability. Exclusive Black Viper Head Shift Knob is available in your choice of four logo colors and must be ordered separately (shift knob height is reduced for competition feel). This shifter handle does not accept the factory knob, but is designed to accept the shift knobs listed below that have a 1/2"; 20 UNF thread.
P4510168	Hurst Short-Throw Shifter (1992–2006 All Models)	249.00
P5153300	shift knob Red Viper Logo	34.50
P5153301	shift knob Silver Viper Logo	35.00
P5153302	shift knob Blue Viper Logo	34.50
P5153303	shift knob Yellow Viper Logo	35.00
Clutch Conversion Kit Converts a 2005-06 Viper to a 2008 Dual Disc Clutch (Requires P5155123 Six Speed Transmission Kit - Not compatible on Vipers with a Flywheel Crank Trigger)
P5155122	Clutch Conversion Kit	520.00
Six Speed Transmission Kit 2008 Viper 6-SPD Includes: Transmission, Shifter Base, Prop Shaft, Crossmember
P5155123	Six Speed Transmission Kit	3173.00
Lightweight Flywheel High-strength alloy steel fl ywheel is a direct replacement for stock SRT10 part and uses production clutch assembly. Reduction of 9.4 lbs. (31%) in flywheel mass, and 39% in flywheel rotating inertia. No release bearing changes, crank trigger changes or calibration required.
P4510169	Lightweight Flywheel 2003–05 Viper SRT10	822.00

	High Durometer Transmission Mounts
	Urethane mount reduces transmission movement under high- load conditions. Improved life compared to stock rubber mount. Same as used on Comp Coupe.
P4510179	Viper SRT-10 (2003-04) High Durometer Transmission mounts	34.50

	180 degree thermostat
P4876900	fits all viper engines 1992-01	129.00
Underdrive Crank Pulley Originally developed for the Competition Coupe. Improves water pump efficiency at high rpms. Constructed of hard-coated aluminum. Requires one of the available Accessory Drive Belts.
P4510177	Underdrive Crank Pulley (2003–05 Viper SRT10)	331.00
P4510224	Accessory Drive Belt for Vehicles with A/C (2003–05 Viper SRT10)	20.00
Race Suspension Kit Coilover Suspension System: • Stage 3 adjustable coilovers • Lightweight aluminum construction • Double adjustable (compression and rebound) • Ride height adjustable • Bridges the gap between street systems and full race systems.
P4510951	2-Way Adjustable Coilover Suspension System (2003-2006 Viper SRT10 Coupe)	4,559.00
Heat Shield Boots These flexible Heat Shield Boots lower joint temperature and protect rubber boots from thermal cracking. Heat shields slip over existing rubber boots—no modifications required. Recommended for racing use, but also good for street applications. Sold Individually.
P4510144	Ball Joint Heat Shield Boot (1996–2006 Viper)	250.00
	GTS-R 805MM S/PLUG WIRE SET
P4876844	gts-r spark plug wire set	69.00

	WIRING HARNESS
P5007142	to install viper in non-viper includes relays connectors,for sensors.instructions	410.00

	FAN AND CONTROL MODULE
P5007266	fan and control module	320.00
	GTS-R CNC-PORTED CYL.HEAD
P4876838AB	gts-r&96-00 &97-00 rt/10 269cc&76cc for intake and exhaust ports,18 deg. Inline valve angle, 64cc combustion chamber, beryllium copper valve seats,magnesium bronze valve guides.(each)	3487.00